荒漠区滴灌施氮量对葡萄叶绿素荧光特性及碳代谢的影响

为了研究蛇龙珠葡萄各生育期施氮量对叶片光合特性和同化产物积累的影响,在滴灌条件下,设定4个尿素施用量:150(N1),300(N2),450(N3),600 kg/hm~2(N4),对照(CK)设置为0 kg/hm~2,分析各生育期(花前5 d DBF5、花后20 d DAF20和花后50 d DAF50)不同氮素营养对葡萄叶片的光合荧光参数及碳代谢相关指标的影响。结果表明:适量增施氮肥提高了叶片叶绿素含量和RuBp羧化酶活性,增强了葡萄树的光合作用,而叶片中PSⅡ有效光化学效率(Fv′/Fm′)、光化学淬灭系数(qP)、PSⅡ实际光化学效率(ΦPSⅡ)的提高及非光化学淬灭系数(NPQ)的降低使叶片叶绿素荧光增强,且N2下的Fv′/Fm′、ΦPSⅡ、qP在DAF20和DAF50时比同期CK分别显著升高了16.10%,17.80%;21.49%,21.13%及11.77%,19.73%;适量增施氮肥提高了蔗糖代谢相关酶的活性和可溶性糖含量,减少了淀粉含量,且在整个生育期,SPS、SS以及蔗糖在N3下有最高值,葡萄糖和果糖在N2下有最高值,而在DBF5、DAF20和DAF50时NI和AI分别在N2、N2和N1处理下有最高值。同CK相比,N2处理显著增加了可溶性糖、单宁、花青素的含量和可滴定酸含量,提高了坐果率和糖酸比,产量达14.50 t/hm~2。综上,在300～450 kg/hm~2的尿素施用范围内明显增强了叶片光合作用,促进可溶性糖的合成,从而为葡萄果实的生长发育供应足够的营养。     

Proteomic profiles during adventitious rooting of Eucalyptus species relevant to the cellulose industry

New Forests - Adventitious rooting (AR) is an obligatory step for vegetative propagation of commercial woody species. Paper industries have interest in Eucalyptus globulus Labill and its hybrids...     

Revisiting rice breeding methods – evaluating the use of rapid generation advance (RGA) for routine rice breeding

Rice production needs to increase in the future in order to meet increasing demands. The development of new improved and higher yielding varieties more quickly will be needed to meet this demand. However, most rice breeding programmes in the world have not changed in several decades. In this article, we revisit the evidence in favour of using rapid generation advance (RGA) as a routine breeding method. We describe preliminary activities at the International Rice Research Institute (IRRI) to re-establish RGA on a large scale as the main breeding method for irrigated rice breeding. We also describe experiences from the early adoption at the Bangladesh Rice Research Institute. Evaluation of RGA breeding lines at IRRI for yield, flowering time and plant height indicated transgressive segregation for all traits. Some RGA lines were also higher yielding than the check varieties. The cost advantages of using RGA compared to the pedigree method were also empirically determined by performing an economic analysis. This indicated that RGA is several times more cost effective and advantages will be realized after 1 year even if facilities need to be built. Based on our experience, and previous independent research empirically testing the RGA method in rice, we recommend that this method should be implemented for routine rice breeding in order to improve breeding efficiency.     

Embodied Resources in Fish and Shrimp Feeds

Global averages were obtained for amounts of energy, land, water, wildfish, nitrogen, and phosphorus embodied in aquaculture feed ingredients. These data allowed amounts of these embodied resources to be calculated for typical feed formulations for channel catfish, Ictalurus punctatus; hybrid catfish, I. punctatus♀ × I. furcatus♂; Vietnamese catfish, Pangasius spp.; Atlantic salmon, Salmo salar; rainbow trout, Oncorhynchus mykiss; tilapia, Oreochromis spp.; whiteleg shrimp, Litopenaeus vannamei; and black tiger shrimp, Penaeus monodon. Embodied resource use per m.t. of feed varied among species: energy, 4.90–12.48 GJ/m.t.; land, 0.082–0.312 ha/m.t.; water, 502–1227 m³/m.t.; wildfish, 0–2880 kg/m.t.; nitrogen, 3.08–8.63 kg/m.t.; phosphorus, 1.16–5.62 kg/m.t. These calculations did not account for variations in site‐specific factors related to embodied resources and feed composition and use. But they suggest that reducing feed conversion ratio (FCR) by 0.1 unit for the seven species (species groups) could potentially reduce feed use by around 1.1 million tonne (Mt) while conserving 9.8 million GJ of energy, 270,000 ha of agricultural land, 1.4 billion m³ of freshwater, and 1.24 Mt of wildfish. Reduction of the FCR is a powerful means of lessening farm‐level production costs and negative impacts of feed production and use.     

不同类型水稻品种产量和氮素吸收利用对大气CO2浓度升高响应的差异

目的 探明不同类型水稻品种产量和氮素吸收利用对FACE(大气CO₂浓度增高)响应的差异。方法 以常规粳稻、杂交籼稻、常规籼稻共6个品种为供试材料,研究FACE对不同类型水稻产量、氮素吸收利用的影响。结果 1）FACE处理极显著提高了水稻产量,平均增加24.17%, 常规籼稻增幅最大,FACE和对照均以杂交籼稻最高;2）FACE处理显著增加了单位面积穗数,常规粳稻增幅最大,并显著增加了杂交籼稻和常规籼稻每穗粒数;3）FACE处理显著提高了成熟期吸氮量和氮素籽粒生产效率,成熟期吸氮量平均增加21.23%,杂交籼稻增幅最大, FACE和对照均以常规籼稻最高;氮素籽粒生产效率平均增加7.33%,杂交籼稻增幅最大,FACE和对照均以杂交籼稻最高。成熟期吸氮量对产量促进作用略大于成熟期氮素籽粒生产效率;4）FACE处理降低了植株含氮率,成熟期平均下降0.105个百分点,常规粳稻降幅最大。FACE处理极显著提高植株干物质量,成熟期平均增加23.95%,常规籼稻增幅最大;FACE处理显著提高常规籼稻和杂交籼稻成熟期单穗吸氮量,分别增加10.79%、13.93%,但常规粳稻下降了9.60%;FACE处理显著提高了成熟期群体吸氮强度,平均增加22.29%,杂交籼稻增幅最大。FACE处理对水稻全生育期天数无显著影响;FACE处理显著提高茎鞘、叶片、穗各器官吸氮量,叶片增幅最大,平均增加51.86%,杂交籼稻增幅最大;FACE处理显著提高了不同生育阶段吸氮量,抽穗-成熟阶段增幅最大,平均增加108.90%,杂交籼稻增幅最大;5）植株干物质量、单穗吸氮量、吸氮强度、穗吸氮量、抽穗-成熟阶段吸氮量对成熟期总吸氮量的促进作用分别大于植株含氮率、单位面积穗数、生育天数、茎鞘叶吸氮量、移栽-分蘖和分蘖-抽穗阶段吸氮量;6）FACE处理显著提高了氮肥偏生产力,降低了每百千克籽粒需氮量,前者平均增加24.16%,常规籼稻增加最多;后者平均降低4.7%,常规籼稻降幅最大。结论 FACE处理可显著提高水稻产量和氮素吸收利用效率,但品种间差异较大。     

Effects of Feeding Frequency on Apparent Energy and Nutrient Digestibility/Availability of Channel Catfish,Ictalurus punctatus,Reared at Optimal and Suboptimal Temperatures

This study examined the effects of feeding frequency (daily versus every other day [EOD]) on nutrient digestibility/availability of channel catfish, Ictalurus punctatus, reared at optimal (30 C) and suboptimal (24 C) temperatures. A 28% protein practical diet was used as the test diet, and chromic oxide was used at 0.75% of the diet as a maker. Twenty channel catfish of a mean weight of 141 g/fish were stocked into 12 flow‐through aquaria (110 L). Fish were fed daily or EOD to apparent satiation for 7 d before fecal samples were collected by the dissection method. Fish fed EOD to apparent satiation consumed more diet on days fed than those fed daily, and fish reared at 30 C consumed more diet than those reared at 24 C. Neither feeding frequency nor water temperature significantly affected apparent digestibility coefficients for energy and protein and apparent availability coefficients for total amino acids. Results show no advantage by feeding EOD over feeding daily on nutrient digestibility and diet utilization efficiency.     

The efficiency of nitrogen in cattle manures when applied to a double‐annual forage cropping system

The use of cattle manure (CM) for fertilization presents challenges for optimizing nitrogen (N) use. Our work aimed to assess N efficiencies, in a 6‐year experiment with three biennial rotations of four crops: oat–sorghum (first year) and ryegrass–maize (second year) in a rainfed humid Mediterranean area of Spain. Fertilization treatments included the following: control (no N), 250 kg mineral N ha^?1 year^?1 (250MN), three CM rates (supplying 170, 250 and 500 kg N ha^?1 year^?1) and four treatments where the two lowest CM rates were complemented with either 80 or 160 kg mineral N ha^?1 year^?1. Treatments were distributed randomly in each of three blocks. Maximum dry‐matter yield (~44–49 t ha^?1 rotation^?1) was achieved in the third rotation, and only the control and the 170CM yielded significantly less. Within the limitations of the EU Nitrate Directive, the N steady state supply of 170CM always requires a complement of mineral N (80 kg N ha^?1) to maximize N agronomic efficiency. The maximum N‐fertilizer replacement value (250CM vs. 250MN) was 0·67, without significant differences between the two treatments in other N‐related efficiency indexes, which indicates that plants took advantage of residual‐N effects. Nitrogen losses by leaching in the 250CM treatment were around 5–7% of the N applied. This reinforces the sustainability of manure recycling in long cropping seasons.     

Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites

A study on the tensile and flexural properties of jute-glass-carbon fibers reinforced epoxy hybrid composites in inter-ply configuration is presented in this paper. Test specimens were manufactured by hand lay-up process and their tensile and flexural properties were obtained. The effects of the hybridization, different fibers content and plies stacking sequence on the mechanical properties of the tested hybrid composites were investigated. Two-parameter Weibull distribution function was used to statistically analyze the experimental results. The failure probability graphs for the tested composites were drawn. These graphs are important tools for helping the designers to understand and choose the suitable material for the required design and development. Results showed that the hybridization process can potentially improve the tensile and flexural properties of jute reinforced composite. The flexural strength decreases when partial laminas from a carbon/epoxy laminate are replaced by glass/epoxy or jute/epoxy laminas. Also, it is realized that incorporating high strength fibers to the outer layers of the composite leads to higher flexural resistance, whilst the order of the layers doesn’t affect the tensile properties.